The broken door handle makes the door set unsafe, causing worry for you. At that time, you need to find the most effective way to fix it. Below, Luxterior will learn with you the most accurate steps to remove and install the door handle at home.
Steps to remove the broken door handle from the lock
Due to the loss of the key, you have to break the lock or because of some incident, the door handle is broken and damaged. When you want to replace it, the first thing you need to do is remove the broken lock and door handle. Do the following:
To replace, you need to remove the broken part of the lock and door handle
– Step 1: You need to prepare the tools to disassemble, the screwdriver is the size of the screw of the door handle.
– Step 2: Use a screwdriver to press the lock lever above to disassemble the broken door handle and the outer cover of the lock.
– Step 3: Unscrew the screws, then remove the disc of the padlock. Finally, you push all the remaining parts of the door handle out.
See more: https://luxterior.com.au/7-reasons-why-the-door-handle-is-stuck-and-how-to-fix-it/
How to replace a broken door handle at home
There are two types of door handles swing door handles and round handles. Because of their different structures, their replacement methods are also not the same.
– For round door handles: Although there are 3 types of round handles, basically the installation method also includes the following steps:
+ Step 1: Need to prepare a screwdriver equal to the size of the door handle screw, drill, drill bit and other disassembly tools.
+ Step 2: Observe and mark the position to install the door handle, drill holes in the place just marked with a sewing machine.
Step 3: Press the tool into the new door handle to remove the inner door handle.
+ Step 4: Install parts such as key assembly and lock body in turn.
+ Step 5: Install the plastic side cover of the handle by punching a hole in the door, inserting the auxiliary cover, and tightening the screws to fix it.
Punch a hole in the door, insert the side panel, and tighten the screws to fix it
– What is the standard way to install the lever door handle?
The lever handle has 3 main parts: the handle, the key and the lock body. You need to prepare 1 screwdriver, 1 drill and 1 drill that fits the size of the screw.
+ Step 1: Choose the right door opening-closing direction to install the most accurate door handle.
+ Step 2: You push the latch of the door handle upwards, then push the bevel pin inward. Then rotate the chamfer pin in the appropriate direction.
+ Step 2: Use a drill to make a hole in the door to install the lock body and door latch. Note, need to rotate for the concave side of the door latch to face the direction of the hexagon screw.
+ Step 3: Assemble the side cover of the lock, next is to install the key.
+ Step 4: Mark the position and assemble the opposite side of the padlock. Finally, you check, close – unlock and adjust accordingly.
See more: https://luxterior.com.au/why-is-the-door-handle-loose-and-how-to-fix-it-easily/
Above are the steps to remove and install to fix the broken door handle at home in the simplest way. No need to spend much time and effort, you can assemble and replace the door handles quickly and easily by yourself. Right now, contact Luxterior to choose the best quality door handles for your beloved home!
